[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
2018 / ECLIPSE CROSS / EC - Workshop Manual
36 -PARKING BRAKE > TROUBLESHOOTING<ELECTRIC PARKING BRAKE><ELECTRIC PARKING BRAKE> > DIAGNOSIS CODE PROCEDURES > CODE No. C1607 ECU FAILURE
Code No. C1607: ECU failure
DIAGNOSIS CODE SET CONDITIONS
If the electric parking brake ECU detects an internal malfunction, the diagnosis code will be set.
PROBABLE CAUSES
Malfunction of the electric parking brake ECU
DIAGNOSIS PROCEDURE
STEP 1. Check whether the diagnosis code is set again.
Check again if the diagnosis code is set.
(1)
Turn the ignition switch to the LOCK (OFF) position.
(2)
Turn the ignition switch to the ON position.
(3)
Check if the diagnosis code is set.
Is diagnosis code No. C1607 set?
Replace the electric parking brake ECU (Refer to
).
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction
).
Replace the electric parking brake ECU (Refer to 
).
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).