2018 / ECLIPSE CROSS / EC - Workshop Manual
36 -PARKING BRAKE > TROUBLESHOOTING<ELECTRIC PARKING BRAKE><ELECTRIC PARKING BRAKE> > SYMPTOM PROCEDURES > The parking brake does not work (is not locked/released) when the parking brake switch is operated.
Inspection Procedure 3: The electric parking brake is not applied or released when the electric parking brake switch is operated.
COMMENTS ON TROUBLE SYMPTOM
This trouble symptom assumes that M.U.T.-IIISE CAN bus diagnosis result is OK and no diagnosis code is set.
PROBABLE CAUSES
- Malfunction of the electric parking brake switch
- Malfunction of the electric parking brake ECU
DIAGNOSIS PROCEDURE
STEP 1. Check the electric parking brake switch.
STEP 2. Retest the system