[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
INSPECTION
2018 / ECLIPSE CROSS / EC - Workshop Manual
42 -BODY > 42A-BODY > TAILGATE > TAILGATE HANDLE AND LATCH > TAILGATE HANDLE AND LATCH INSPECTION
TAILGATE LOCK RELEASE HANDLE (TAILGATE OPEN SWITCH) CHECK
Switch position
Terminal number
Normal value
Push (open)
1 - 2
Continuity exists (2 Ω or less)
Release
1 - 2
No continuity
TAILGATE LOCK ACTUATOR CHECK
Lever position
Battery connection
Lever operation
At the "SET" position
Connect terminal 2 to negative battery terminal.
Connect terminal 3 to positive battery terminal.
Lever moves from "SET" to "OPEN" position.
TAILGATE LATCH SWITCH CHECK
Claw position
Terminal number
Normal value
Unlatch (ON)/ Half-latch (ON)
1 - 2
Continuity exists (2 Ω or less)
Full-latch (OFF)
1 - 2
No continuity
