2018 / ECLIPSE CROSS / EC - Workshop Manual
42 -BODY > 42B-KEYLESS OPERATION SYSTEM (KOS) > ON-VEHICLE SERVICE > ANTENNA COMMUNICATION TEST
Connect the M.U.T.-IIISE to the 16-pin diagnosis connector as follows.
| note | For details on how to use the M.U.T.-IIISE, refer to the "M.U.T.-IIISE User's Manual." |
1. Start the M.U.T.-IIISE system.
2. Select "KOS/OSS/IMMO/Keyless" button from the "System Select" screen. Then, select the applicable option code item and push the OK button.- The display of "Special Function" screen changes, depending on the contents of the option. For vehicles with KOS, select "with KOS".
3. Select "Comm. Test" on the "Special Function" screen.
4. Select the antenna to be tested on "Comm. Test" screen, and press the OK button with the keyless operation key placed within the communication operational area.
5. "Communication is normal." is displayed. Press the OK button to finish.
