Mitsubishi Motors Service Manual

2018 / ECLIPSE CROSS / EC - Workshop Manual

42 -BODY > 42B-KEYLESS OPERATION SYSTEM (KOS) > TROUBLESHOOTING > DIAGNOSIS CODE PROCEDURES > B1144 ESL lock/unlock fail

Code No. B1144 ESL actuation not completed

caution

When replacing the ECU, always check that the communication circuit is normal.

DIAGNOSTIC FUNCTION

If the control completion information cannot be received from the electric steering lock via LIN when the electric steering lock is locked/unlocked, KOS&OSS-ECU sets diagnosis code No.B1144. At the same time, KOS&OSS-ECU displays the immobilizer certification system inspection warning to the combination meter.

JUDGEMENT CRITERIA

Check Conditions

After KOS&OSS-ECU activation

Judgement Criterion

Control completion information is not received from the electric steering lock.

PROBABLE CAUSES

Electric steering lock malfunction
LIN bus line malfunction
Malfunction of KOS&OSS-ECU

DIAGNOSIS PROCEDURE

1. Check of short to earth, short to power supply or open circuit in LIN line between electric steering lock connector and KOS&OSS-ECU connector.

2. After performing the locking and unlocking operations of the electric steering lock, recheck the diagnosis code of KOS&OSS-ECU.

3. KOS&OSS-ECU diagnosis code recheck