[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
52 -INTERIOR AND SUPPLEMENTAL RESTRAINT SYSTEM(SRS) > 52A-INTERIOR > FLOOR CONSOLE ASSEMBLY > REAR FLOOR CONSOLE ASSEMBLY > REAR FLOOR CONSOLE ASSEMBLY REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
 
 
<Lever type parking brake>
 
 
Removal steps
>>A<<1.Floor console box mat
2.Floor console lid
3.Floor rear console accessory panel assembly
•Accessory socket cover (Refer to GROUP 54A - Accessory Socket ).
4.Floor rear console accessory panel
5.Floor console assembly rear
 
 
<Lever type parking brake (slide console lid)>
 
 
Removal steps
1.Floor console tray
>>A<<2.Floor console box mat
3.Floor rear console accessory panel assembly
4.Heated seat switch (rear)
•Accessory socket cover (Refer to GROUP 54A - Accessory Socket ).
5.Floor rear console accessory panel
6.Floor console assembly rear
 
 
<Electric parking brake>
 
 
Removal steps
1.Floor console tray
2.Floor console box mat
3.Floor console lid
4.Floor rear console accessory panel assembly
5.Heated seat switch (rear)
•Accessory socket cover (Refer to GROUP 54A - Accessory Socket ).
6.Floor rear console accessory panel
7.Floor console assembly rear
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< FLOOR CONSOLE BOX MAT INSTALLATION
 
Install the floor console box mat in the direction shown in the figure.