[ Model - ECLIPSE CROSS / Year - 2018 ]
INSPECTION
2018 / ECLIPSE CROSS / EC - Workshop Manual
52 -INTERIOR AND SUPPLEMENTAL RESTRAINT SYSTEM(SRS) > 52A-INTERIOR > FRONT SEAT BELT > FRONT SEAT BELT > INSPECTION
 
 
 
 
FRONT SEAT BELT SWITCH CONTINUITY CHECK (DRIVER’S SIDE)
 
If there is continuity when the outer seat belt is fastened, replace the inner seat belt.
 
ItemTester connectionSpecified condition
Fastened seat belt1 - 2Open circuit
Unfastened seat beltContinuity exists (0.2Ω or less)
 

 
 
FRONT SEAT BELT SWITCH CONTINUITY CHECK (PASSENGER’S SIDE)
 
If there is continuity when the outer seat belt is fastened, replace the inner seat belt.
 
ItemTester connectionSpecified condition
-Seat belt switch connector (terminal No.1) - Seat reminder sensor connector (terminal No.1)Continuity exists (0.2Ω or less)
Fastened seat beltSeat belt switch connector (terminal No.2) - Seat reminder sensor connector (terminal No.3)Open circuit
Unfastened seat beltContinuity exists (0.2Ω or less)