[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
52 -INTERIOR AND SUPPLEMENTAL RESTRAINT SYSTEM(SRS) > 52B-SUPPLEMENTAL RESTRAINT SYSTEM (SRS) > SIDE-AIRBAG MODULE(S) > SIDE-AIRBAG MODULE(S) INSPECTION
INSPECTION
 
 
 
 
 
caution
  • Never measure the side-airbag module (squib) circuit resistance even with the specified tester. Measuring the circuit resistance with a tester causes accidental air bag deployment due to current that flows or static, resulting in serious personal injury.
  • When replacing the parts, discard the old parts after deploying the air bag according to the specified procedure (Refer to ).
If any malfunction is found in the following inspections, replace the front seat assembly with the new one. Discard the removed front seat assembly after deploying the air bag according to the specified procedure (Refer to ).
  1. Dent or deformation to side-airbag module deployment part
  2. Check the harness and connector for damage and the terminal for deformation.