2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > COMBINATION METER > DIAGNOSIS CODE PROCEDURES > CODE No.B2463 RHEOSTAT SWITCH SEIZURE
Code No.B2463 Rheostat switch sticking
TROUBLE JUDGEMENT
If the combination meter detects the rheostat illumination button pressed state for 60 seconds or more continuously with the ignition switch at the ON position and diagnosis code No. U1190 is not set, diagnosis code No. B2463 is set.
PROBABLE CAUSES
- Malfunction of combination meter
- Malfunction of rheostat illumination button
DIAGNOSIS PROCEDURE
1. Rheostat illumination button check.
2. Check again if the diagnosis code is set in the combination meter.
