[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > ULTRASONIC MISACCELERATION MITIGATION SYSTEM/CORNER SENSOR SYSTEM > SONAR SWITCH > SONAR SWITCH INSPECTION
INSPECTION
ON/OFF CHECK
Switch position
Terminal number
Normal condition
ON (switch pushed)
10 - 13
Continuity exists (2 Ω or less)
OFF (switch released)
No continuity
INDICATOR CHECK
Apply the battery voltage to the connector terminal No. 9, earth the terminal No. 14, and then check that the indicator illuminates.
ILLUMINATION CHECK
Apply the battery voltage to the connector terminal No. 11, earth the terminal No. 12, and then check that the illuminates.
