[ Model - ECLIPSE CROSS / Year - 2018 ]
Workshop Manual
Technical Information Manual
Body Repair Manual
Pre-delivery Inspection and Periodic Maintenance
PRINT
PRINT (GROUP)
IGNITION SWITCH CHECK
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > IGNITION SWITCH<Vehicles without keyless operation system><Vehicles without keyless operation system> > IGNITION SWITCH > IGNITION SWITCH INSPECTION
With the ignition switch mounted to the vehicle, disconnect the ignition switch connection connector, and then perform the continuity check in each ignition key position.
Ignition key position
Terminal number
Normal condition
LOCK
1 - 2, 1 - 4, 1 - 5, 1 - 6
No continuity
ACC
1 - 6
Continuity exists (2 Ω or less)
ON
1 - 2 - 4 - 6
Continuity exists (2 Ω or less)
START
1 - 2 - 5
Continuity exists (2 Ω or less)
