[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
54 -CHASSIS ELECTRICAL > 54A-CHASSIS ELECTRICAL > ETACS > DIAGNOSIS CODE PROCEDURES > CODE NO.B222C CODING NOT COMPLETED
Code No.B222C Coding not completed
 
 
 
 
JUDGEMENT CRITERIA
If the ETACS-ECU is in the initial state or the variant coding is incomplete, the ETACS-ECU sets the diagnosis code No. B222C.
 
 
PROBABLE CAUSES
  • Variant code not written
  • Malfunction of the ETACS-ECU
 
 
DIAGNOSIS PROCEDURE
1. Check whether the diagnosis code is set again.