INSPECTION PROCEDURE 1: Communication with the M.U.T.-IIISE is not possible.
2018 / ECLIPSE CROSS / EC - Workshop Manual
55 -HEATER, AIR CONDITIONER AND VENTILATION > TROUBLESHOOTING > SYMPTOM PROCEDURES > COMMUNICATION WITH THE M.U.T.-III IS NOT POSSIBLE
 
 
 
 
COMMENTS ON TROUBLE SYMPTOM
If communication with all other systems is not possible, there is a high possibility that there is a malfunction of the diagnosis line. If only the A/C system can not communicate with the M.U.T.-IIISE, the A/C controller assembly (A/C-ECU) may be defective.
 
 
 
PROBABLE CAUSE
Malfunction of the A/C controller assembly (A/C-ECU)