DRIVER CONTROLS › EXTERIOR LIGHTING SYSTEM › COMPONENT DIAGNOSIS

PARKING LAMP CIRCUIT

XENON TYPE

Component Function Check

1.CHECK PARKING LAMP OPERATION

IPDM E/R AUTO ACTIVE TEST

CONSULT-III ACTIVE TEST

Select "EXTERNAL LAMPS" of IPDM E/R active test item.
With operating the test items, check that the parking lamp is turned ON.
TAIL
: Parking lamp ON
Off
: Parking lamp OFF

Is the parking lamp turned ON/OFF?

YES>>Parking lamp circuit is normal.

NO>>Refer to Diagnosis Procedure.

1.CHECK PARKING LAMP FUSE

Unit	Location	Fuse No.	Capacity
Parking lamp	IPDM E/R	#52	10 A

Is the fuse fusing?

YES>>GO TO 2.

NO>>GO TO 3.

2.CHECK PARKING LAMP SHORT CIRCUIT

Does continuity exist?

YES>>Repair the harnesses or connectors. And then replace the fuse.

NO>>Replace the fuse. (Replace IPDM E/R if fusing is found again.)

3.CHECK PARKING LAMP BULB

Check the applicable lamp bulb.

Is the bulb normal?

YES>>GO TO 4.

NO>>Replace the bulb.

4.CHECK PARKING LAMP OUTPUT VOLTAGE

CONSULT-III ACTIVE TEST

Is the measurement value normal?

YES>>GO TO 5.

NO>>Replace IPDM E/R.

5.CHECK PARKING LAMP OPEN CIRCUIT

Does continuity exist?

YES>>GO TO 6.

NO>>Repair the harnesses or connectors.

6.CHECK PARKING LAMP GROUND OPEN CIRCUIT

Check continuity between the front combination lamp harness connector and the ground.

Does continuity exist?

YES>>Replace the front combination lamp.

NO>>Repair the harnesses or connectors.