Nissan GT-R (R35) · Service Manual
DRIVER CONTROLS
DRIVER CONTROLS › EXTERIOR LIGHTING SYSTEM › COMPONENT DIAGNOSIS
LICENSE PLATE LAMP CIRCUIT
XENON TYPE
Component Function Check
Diagnosis Procedure
Component Function Check
NOTE：
Check the tail lamp circuit if the tail lamp and the license plate lamp are not turned ON.
1.CHECK LICENSE PLATE LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
Activate IPDM E/R auto active test. Refer to
Diagnosis Description
.
Check that the license plate lamp is turned ON.
CONSULT-III ACTIVE TEST
Select "EXTERNAL LAMPS" of IPDM E/R active test item.
With operating the test items, check that the license plate lamp is turned ON.
TAIL
: License plate lamp ON
Off
: License plate lamp OFF
Is the license plate lamp turned ON?
YES
>>
License plate lamp circuit is normal.
NO
>>
Refer to
Diagnosis Procedure
.
Diagnosis Procedure
1.CHECK LICENSE PLATE LAMP BULB
Check the applicable lamp bulb.
Is the bulb normal?
YES
>>
GO TO 2
.
NO
>>
Replace the bulb.
2.CHECK LICENSE PLATE LAMP OPEN CIRCUIT
Turn the ignition switch OFF.
Disconnect IPDM E/R connector and the license plate lamp connector.
Check continuity between the IPDM E/R harness connector and the license plate lamp harness connector.
IPDM E/R
License plate lamp
Continuity
Connector
Terminal
Connector
Terminal
RH
E5
7
B154
1
Existed
LH
B152
1
Does continuity exist?
YES
>>
GO TO 3
.
NO
>>
Repair the harnesses or connectors.
3.CHECK LICENSE PLATE LAMP GROUND OPEN CIRCUIT
Check continuity between the license plate lamp harness connector and the ground.
License plate lamp
Ground
Continuity
Connector
Terminal
RH
B154
2
Existed
LH
B152
2
Does continuity exist?
YES
>>
Replace the license plate lamp.
NO
>>
Repair the harnesses or connectors.
1.CHECK LICENSE PLATE LAMP OPERATION
IPDM E/R AUTO ACTIVE TEST
CONSULT-III ACTIVE TEST