REAR SIDE MARKER LAMP CIRCUIT

IPDM E/R AUTO ACTIVE TEST

1. Activate IPDM E/R auto active test. Refer to Diagnosis Description.
2. Check that the rear side marker lamp is turned ON.

CONSULT-III ACTIVE TEST

1. Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2. With operating the test items, check that the rear side marker lamp is turned ON.
   

   TAIL	: Rear side marker lamp ON
   Off	: Rear side marker lamp OFF

   
   

YES>>Rear side marker lamp circuit is normal.

NO>>Refer to Diagnosis Procedure.

1. Turn the ignition switch OFF.
2. Disconnect the rear combination lamp connector and the rear side marker lamp connector.
3. Check continuity between the rear combination lamp harness connector and the rear side marker lamp harness connector.
   

   Rear combination lamp			Rear side marker lamp		Continuity
   Connector		Terminal	Connector	Terminal
   RH	B240	5	B372	1	Existed
   LH	B57	5	B371	1

   
   

YES>>GO TO 2.

NO>>Repair the harnesses or connectors.

Check continuity between the rear combination lamp harness connector and the rear side marker lamp.

Rear combination lamp			Rear side marker lamp		Continuity
Connector		Terminal	Connector	Terminal
RH	B240	3	B372	2	Existed
LH	B57	3	B371	2

YES>>Replace the rear side marker lamp assembly.

NO>>Repair the harnesses or connectors.