BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

Check the combination switch. Refer to Symptom Table.

YES>>GO TO 2.

NO>>Repair or replace the malfunctioning part.

CONSULT-III DATA MONITOR

1. Select “HL LO REQ” of IPDM E/R data monitor item.
2. With operating the lighting switch, check the monitor status.

Monitor item	Condition		Monitor status
HL LO REQ	Lighting switch	2ND	On
		OFF	Off

YES>>GO TO 3.

NO>>Replace BCM. Refer to Exploded View.

Check the headlamp (LO) circuit. Refer to Component Function Check.

YES>>Replace IPDM E/R.

NO>>Repair or replace the malfunctioning part.