Nissan GT-R (R35) · Service Manual
ENGINE
ENGINE › ENGINE CONTROL SYSTEM › BASIC INSPECTION
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
INSPECTION AND ADJUSTMENT · VR38
Description
Special Repair Requirement
Description
When replacing ECM, the following procedure must be performed.
Special Repair Requirement
1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS
Refer to
Special Repair Requirement
.
>>
GO TO 2
.
2.PERFORM VIN REGISTRATION
Refer to
Special Repair Requirement (GT-R certified NISSAN dealer)
.
>>
GO TO 3
.
3.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Refer to
Special Repair Requirement (GT-R certified NISSAN dealer)
.
>>
GO TO 4
.
4.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Refer to
Special Repair Requirement (GT-R certified NISSAN dealer)
.
>>
GO TO 5
.
5.PERFORM IDLE AIR VOLUME LEARNING
Refer to
Special Repair Requirement (GT-R certified NISSAN dealer)
.
>>
END
1.PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS