Nissan GT-R (R35) · Service Manual ENGINE

P0500 VSS

VR38

P0500

Description


The vehicle speed signal is sent to the “combination meter” from the “ABS actuator and electric unit (control unit)” by CAN communication line. The “combination meter” then sends a signal to the ECM by CAN communication line.

DTC Logic

 
 DTC DETECTION LOGIC

NOTE：
  • If DTC P0500 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.
  • If DTC P0500 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to DTC Logic (GT-R certified NISSAN dealer).


DTC No.
 		Trouble diagnosis name
 		DTC detecting condition
 		Possible cause
P0500
 		Vehicle speed sensor
 		The vehicle speed signal sent to ECM is almost 0 km/h (0 MPH) even when vehicle is being driven.
  • Harness or connectors
    (The CAN communication line is open or shorted)
  • Harness or connectors
    (The vehicle speed signal circuit is open or shorted)
  • Wheel sensor
  • Combination meter
  • ABS actuator and electric unit (control unit)

 
 DTC CONFIRMATION PROCEDURE

 
 1.INSPECTION START
 
 2.PRECONDITIONING
 
 3.CHECK VEHICLE SPEED SIGNAL
 
 4.PERFORM DTC CONFIRMATION PROCEDURE
 
 5.PERFORM COMPONENT FUNCTION CHECK

Component Function Check


 
 1.PERFORM COMPONENT FUNCTION CHECK

Diagnosis Procedure


 
 1.CHECK DTC WITH “ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)”
 
 2.CHECK DTC WITH “COMBINATION METER”