P1226, P1235 TP SENSOR
VR38
P1226 P1235
Description
Electric throttle control actuator consists of throttle control motor, throttle position sensor, etc. The throttle position sensor responds to the throttle valve movement.
The throttle position sensor has two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
DTC Logic
DTC DETECTION LOGIC|
DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
|
P1226 |
Closed throttle position learning performance (bank 1) |
Closed throttle position learning is not performed successfully, repeatedly. |
|
|
P1235 |
Closed throttle position learning performance (bank 2) |
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING