ASCD INDICATOR

VR38

Description
Component Function Check
Diagnosis Procedure

Description

ASCD indicator lamp illuminates to indicate ASCD operation status. Lamp has two indicators, CRUISE and SET, and is integrated in combination meter.
CRUISE lamp illuminates when MAIN switch on ASCD steering switch is turned ON to indicated that ASCD system is ready for operation.
SET lamp illuminates when the following conditions are met.

CRUISE lamp is illuminated.
SET/COAST switch on ASCD steering switch is turned ON while vehicle speed is within the range of the ASCD setting.

SET lamp remains lit during ASCD control.
Refer to System Description (GT-R certified NISSAN dealer) for the ASCD function.

Component Function Check

1.CHECK ASCD INDICATOR FUNCTION

Diagnosis Procedure

1.CHECK DTC

2.CHECK DTC WITH COMBINATION METER

3.CHECK INTERMITTENT INCIDENT

ASCD INDICATOR	CONDITION		SPECIFICATION
CRUISE LAMP	Ignition switch: ON	MAIN switch: Pressed at the 1st time → at the 2nd time	ON → OFF
SET LAMP	MAIN switch: ON When vehicle speed is between 40 km/h (25 MPH) and 250 km/h (156 MPH)	ASCD: Operating	ON
SET LAMP		ASCD: Not operating	OFF