SHIFT POSITION INDICATOR

• The combination meter receives the shift position signal from TCM via CAN communication, and displays the shift position to the shift position indicator.
• The combination meter receives the shift position signal from TCM via CAN communication. If the status does not allow a shift change, it blinks the shift position indicator.

1.	Fuel level sensor unit (Sub)	2.	Fuel level sensor unit (Main)	3.	Door switch (passenger side)
4.	Oil pressure sensor	5.	Ambient sensor	6.	Oil level sensor
7.	Washer level switch	8.	AWD control unit	9.	Brake fluid level switch
10.	ABS actuator and electric unit (control unit)	11.	Door switch (driver side)	12.	TCM
13.	Trunk switch	14.	Combination meter	15.	Combination switch (Lighting switch)
16.	Low tire pressure warning control unit	17.	Parking brake	18.	BCM
19.	ECM
A.	Under rear seat	B.	Right side of engine	C.	Radiator core support (center)
D.	Oil pan LH upper	E.	Front RH seat under	F.	Trunk room left back
G.	Lower instrument panel LH	H.	Dashboard side lower (passenger seat side)	I.	Glove box assembly back

Unit	Description
Combination meter	Receives the shift position signal from TCM via CAN communication, and displays the shift position to the shift position indicator. Receives the shift position signal from TCM via CAN communication, and if the status does not allow a shift change, it blinks the shift position display in the shift position indicator.
TCM	Transmits the shift position signal to the combination meter via CAN communication.