Nissan GT-R (R35) · Service Manual
DRIVER INFORMATION & MULTIMEDIA
DRIVER INFORMATION & MULTIMEDIA › METER, WARNING LAMP & INDICATOR › SYMPTOM DIAGNOSIS
THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DISPLAY
Description
Diagnosis Procedure
Description
The door warning is displayed while all doors are fully closed.
The door warning is not displayed while a door is not fully closed.
Diagnosis Procedure
1.CHECK BCM INPUT SIGNAL
Connect CONSULT‐III and inspect the BCM input signals. Refer to
Component Function Check
.
Is the inspection result normal?
YES
>>
GO TO 2.
NO
>>
GO TO 3.
2.CHECK COMBINATION METER INPUT SIGNAL
Connect CONSULT‐III.
Select “DATA MONITOR” for the “METER/M&A”, and then check the “DOOR W/L” monitor value.
DOOR W/L
Door open
: On
Door closed
:Off
Is the inspection result normal?
YES
>>
Replace the combination meter.
NO
>>
Replace BCM. Refer to
Removal and Installation
.
3.CHECK DOOR SWITCH SIGNAL CIRCUIT
Perform the door switch signal circuit inspection. Refer to
Diagnosis Procedure
.
Is the inspection result normal?
YES
>>
GO TO 4.
NO
>>
Repair the harnesses or connectors.
4.CHECK DOOR SWITCH
Perform the unit inspection of door switch. Refer to
Component Inspection
.
Is the inspection result normal?
YES
>>
Replace the combination meter.
NO
>>
Replace the malfunctioning door switch. Refer to
Removal and Installation
.
1.CHECK BCM INPUT SIGNAL