C1D06 ENGINE SPEED SIGNAL

Bilstein DampTronic

C1D06

Description

The engine speed signal is transmitted from ECM to E-SUS control unit via CAN communication.

DTC DETECTION LOGIC

DTC	Display Item	Malfunction detected condition	Possible causes
C1D06	ENG SPEED SIG	A malfunction is detected in the engine speed signal output from ECM to CAN communication. No transmission of the engine speed signal from ECM.	Harness or connector (CAN communication line) ECM E-SUS control unit

DTC REPRODUCTION PROCEDURE

1.DTC REPRODUCTION PROCEDURE

1.PERFORM SELF-DIAGNOSIS OF ECM

2.PERFORM SELF-DIAGNOSIS

3.CHECK INFORMATION