Nissan GT-R (R35) · Service Manual SUSPENSION

C1D07 STOP LAMP SWITCH

Bilstein DampTronic

C1D07

Description


The stop lamp switch signal is transmitted from the ABS actuator and electric unit (control unit) to E-SUS control unit via CAN communication.

DTC Logic

 
 DTC DETECTION LOGIC

DTC
 		Display Item
 		Malfunction detected condition
 		Possible causes
C1D07
 		STOP LAMP SW SIG
 		No transmission of stop lamp switch signal from the ABS actuator and electric unit (control unit).
  • Harness or connector (CAN communication line)
  • ABS actuator and electric unit (control unit)
  • E-SUS control unit

 
 DTC REPRODUCTION PROCEDURE

 
 1.DTC REPRODUCTION PROCEDURE

Diagnosis Procedure


 
 1.PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
 
 2.PERFORM SELF-DIAGNOSIS
 
 3.CHECK INFORMATION