Nissan GT-R (R35) · Service Manual SUSPENSION

C1D09 BRAKE FLUID PRESSURE SIGNAL

Bilstein DampTronic

C1D09

Description


The brake pressure control signal is transmitted from the ABS actuator and electric unit (control unit) to E-SUS control unit via CAN communication.

DTC Logic

 
 DTC DETECTION LOGIC

DTC
 		Display Item
 		Malfunction detected condition
 		Possible causes
C1D09
 		BRK FLD PRESS SIG
  • A malfunction is detected in the brake pressure control signal output from the ABS actuator and electric unit (control unit) to CAN communication.
  • No transmission of brake pressure control signal from the ABS actuator and electric unit (control unit).
  • Harness or connector (CAN communication line)
  • ABS actuator and electric unit (control unit)
  • E-SUS control unit

 
 DTC REPRODUCTION PROCEDURE

 
 1.DTC REPRODUCTION PROCEDURE

Diagnosis Procedure


 
 1.PERFORM SELF-DIAGNOSIS OF ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)
 
 2.PERFORM SELF-DIAGNOSIS
 
 3.CHECK INFORMATION