SERVICE DATA AND SPECIFICATIONS (SDS)

Unit: mm (in.)

Front brake	Cylinder bore diameter		36.0 (1.147) × 2 + 34.0 (1.339) × 2 + 30.0 (1.181) × 2
	Pad length × width × thickness		184.7 × 64.0 × 11.1 (7.27 × 2.250 × 0.437)
	Rotor outer diameter × thickness		380 × 34.0 (14.96 × 1.339)
Rear brake	Cylinder bore diameter		30.0 (1.181) × 4
	Pad length × width × thickness		128.7 × 51.8 × 11.1 (5.07 × 2.039 × 0.437
	Rotor outer diameter × thickness		380 × 30.0 (14.96 × 1.181)
Master cylinder	Cylinder bore diameter		28.5 (18/16)
Control valve	Valve type		Electric brake force distribution
Brake booster	Diaphragm diameter		Primary: 230 (9.06)
			Secondary: 205 (8.07)

Unit: mm (in.)

Item	Standard
Brake pedal height	169.0 – 179.0 (6.65 – 7.05)
Clearance between the stop lamp switch and ASCD brake switch threaded end and the stopper rubber	0.2 – 1.96 (0.008 – 0.0772)
Brake pedal play	3.0 – 11.0 (0.118 – 0.433)
Depressed brake pedal height [Depressing 490 N (50 kg, 110 lb) while turning the engine ON]	100 (3.94) or more

Unit: mm (in.)

Item	Standard
Input rod length	129.5 − 130.5 (5.10 − 5.14)

Unit: mm (in.)

Item		Limit
Brake pad	Wear thickness	4.5 (0.177)
Disc rotor	Wear thickness	32.0 (1.260)

Unit: mm (in.)

Item		Limit
Brake pad	Wear thickness	4.5 (0.177)
Disc rotor	Wear thickness	28.0 (1.102)