TURN SIGNAL LAMP BLINKS

1. Check the input/output values of the low tire pressure warning control unit. Refer to Reference Value (GT-R certified NISSAN dealer).

YES>>GO TO 3.

NO>>GO TO 2.

Check the circuits of the low tire pressure warning control unit. Refer to Diagnosis Procedure (GT-R certified NISSAN dealer).

YES>>GO TO 3.

NO>>Repair or replace error-detected parts.

1. Turn the ignition switch OFF.
2. Disconnect the low tire pressure warning control unit harness connector and BCM harness connector.
3. Check the continuity between the terminals of the low tire pressure warning control unit harness connector and the BCM harness connector.

Low tire pressure warning control unit		BCM		Continuity
Connector	Terminal	Connector	Terminal
M14	30	M122	110	Existed

YES>>Check the BCM. Refer to Exploded View.

NO>>Repair or replace error-detected parts.