TRUNK ROOM LAMP CIRCUIT

CONSULT-III ACTIVE TEST

1. Turn ignition switch ON.
2. Select “LUGGAGE LAMP TEST” of BCM (INT LAMP) active test item.
3. With operating the test items, check that trunk room lamp operation.
   

   On	: Trunk room lamp ON
   Off	: Trunk room lamp OFF

   
   

YES>>Trunk room lamp circuit is normal.

NO>>Refer to Diagnosis Procedure.

CONSULT-III ACTIVE TEST

1. Turn ignition switch OFF.
2. Remove trunk room lamp bulb.
3. Turn ignition switch ON.
4. Select “LUGGAGE LAMP TEST” of BCM (INT LAMP) active test item.
5. With operating the test item, check continuity between BCM harness connector and ground.

BCM		Ground	Test item	Continuity
Connector	Terminal		LUGGAGE LAMP TEST
M120	30		On	Existed
			Off	Not existed

YES>>GO TO 2.

Fixed ON>>GO TO 3.

Fixed OFF>>Replace BCM.

1. Turn ignition switch OFF.
2. Disconnect BCM connector and trunk room lamp connector.
3. Check continuity between BCM harness connector and trunk room lamp harness connector.

BCM		Trunk room lamp		Continuity
Connector	Terminal	Connector	Terminal
M120	30	B42	2	Existed

YES>>Replace the trunk room lamp.

NO>>Repair the harnesses or connectors.

1. Turn ignition switch OFF.
2. Disconnect BCM connector and trunk room lamp connector.
3. Check continuity between BCM harness connector and ground.

BCM		Ground	Continuity
Connector	Terminal
M120	30		Not existed

YES>>Repair the harnesses or connectors.

NO>>Replace BCM.