DIAGNOSIS AND REPAIR WORK FLOW

If steering angle sensor, steering system parts, suspension system parts, ABS actuator and electric unit (control unit) have been replaced, or if wheel alignment has been adjusted, be sure to adjust neutral position of steering angle sensor before driving. Refer to Description (GT-R certified NISSAN dealer).

If yaw rate/side/decel G sensor or ABS actuator and electric unit (control unit) have been replaced, be sure to calibrate decel G sensor before driving. Refer to Description (GT-R certified NISSAN dealer).

If ABS actuator and electric unit (control unit) have been replaced, be sure to calibrate pressure sensor before driving. Refer to Description (GT-R certified NISSAN dealer).

If ABS actuator and electric unit (control unit) have been replaced, be sure to calibrate valve before driving. Refer to Description (GT-R certified NISSAN dealer).