C1193 VALVE CALIBRATION

Select “PRESS SEN CALIBRATION” in “WORK SUPPORT”, and perform pressure sensor calibration.

>>GO TO 2.

Select “VALVE CALIBRATION” in “WORK SUPPORT”, and perform valve calibration.

YES>>INSPECTION END

NO>>GO TO 3.

Perform ABS actuator and electric unit (control unit) self-diagnosis.

YES>>Replace ABS actuator and electric unit (control unit).

NO>>Repair or replace error-detected parts.

After replacing an ABS actuator and electric unit (control unit), be sure to perform the following procedure.

• Steering angle sensor adjustment: Refer to Description (GT-R certified NISSAN dealer).
• Decel G sensor calibration: Refer to Description (GT-R certified NISSAN dealer).
• Pressure sensor calibration: Refer to Description (GT-R certified NISSAN dealer).
• Valve calibration: Refer to Description (GT-R certified NISSAN dealer).

>>END