AV BRANCH LINE CIRCUIT

1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the AV control unit for damage, bend and loose connection (unit side and connector side).

YES>>GO TO 2.

NO>>Repair the terminal and connector.

1. Disconnect the connector of AV control unit.
2. Check the resistance between the AV control unit harness connector terminals.
   

   AV control unit harness connector			Resistance (Ω)
   Connector No.	Terminal No.
   M81	52	53	Approx. 54 – 66

   
   

YES>>GO TO 3.

NO>>Repair the AV control unit branch line.

Check the power supply and the ground circuit of the AV control unit. Refer to the following.

• Base audio with navigation: Diagnosis Procedure
• BOSE audio with navigation: Diagnosis Procedure

YES (Present error)>>
Replace the AV control unit. Refer to the following.

• Base audio with navigation: Exploded View
  
• BOSE audio with navigation: Exploded View
  

YES (Past error)>>Error was detected in the AV control unit branch line.

NO>>Repair the power supply and the ground circuit.