Nissan GT-R (R35) · Service Manual ELECTRICAL & POWER CONTROL

ELECTRICAL & POWER CONTROL › LAN SYSTEM › COMPONENT DIAGNOSIS

DLC BRANCH LINE CIRCUIT

CAN

1.CHECK CONNECTOR

Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the data link connector for damage, bend and loose connection (connector side and harness side).

Is the inspection result normal?

YES>>GO TO 2.

NO>>Repair the terminal and connector.

2.CHECK HARNESS FOR OPEN CIRCUIT

Check the resistance between the data link connector terminals.

Data link connector			Resistance (Ω)
Connector No.	Terminal No.
M24	6	14	Approx. 54 – 66

Is the measurement value within the specification?

YES (Present error)>>Diagnose again. Refer to Trouble Diagnosis Flow Chart.

YES (Past error)>>Error was detected in the data link connector branch line circuit.

NO>>Repair the data link connector branch line.

Generated from the original legacy manufacturer publication by Bojo.