- Turn ignition switch OFF.
- Disconnect display unit connector and AV control unit connector.
- Check continuity between display unit harness connector terminal 9 and AV control unit harness connector terminal 67.
Display unit
| AV control unit
| Continuity
|
Connector
| Terminals
| Connector
| Terminals
|
M71
| 9
| M82
| 67
| Existed
|
- Check continuity between display unit harness connector terminal 9 and ground.
Display unit
| Ground
| Continuity
|
Connector
| Terminals
|
M71
| 9
| Not existed
|
Is the inspection result normal?
YES
>>GO TO 2.
NO
>>Repair harness or connector.
1.CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT