BUZZER
DIAGNOSIS SYSTEM (BCM)
CONSULT‐III APPLICATION ITEMS|
Test item |
Diagnosis mode |
Description |
|
BUZZER |
Data Monitor |
Displays BCM input data in real time. |
|
Active Test |
Operation of electrical loads can be checked by sending driving signal to them. |
DATA MONITOR|
Display item [Unit] |
Description |
|
PUSH SW [On/Off] |
Status of push button ignition switch judged by BCM. |
|
UNLK SEN‐DR [On/Off] |
Status of unlock sensor judged by BCM. |
|
VEH SPEED 1 [Km/h] |
Value of vehicle speed signal received from ABS actuator and electric unit (control unit) with CAN communication line. |
|
KEY SW‐SLOT [On/Off] |
Status of key slot judged by BCM. |
|
TAIL LAMP SW [On/Off] |
Status of each switch judged by BCM using the combination switch readout function. |
|
FR FOG SW [On/Off] |
Status of front fog lamp switch judged by BCM. |
|
DOOR SW‐DR [On/Off] |
Status of driver side door switch judged by BCM. |
ACTIVE TEST|
Display item [Unit] |
Description |
|
IGN KEY WARN ALM |
The key warning chime operation can be checked by operating the relevant function (On/Off). |
|
SEAT BELT WARN TEST |
The seat belt warning chime operation can be checked by operating the relevant function (On/Off). |
|
ID REGIST WARNING |
The ID regist warning chime operation can be checked by operating the relevant function (On/Off). |
|
LIGHT WARN ALM |
The light warning chime operation can be checked by operating the relevant function (On/Off). |