THE PARKING BRAKE RELEASE WARNING CONTINUES SOUNDING, OR DOES NOT SOUND

1. Start the engine.
2. Check the operation of the brake warning lamp by operating the parking brake.
   

   When parking brake is applied	: ON
   When parking brake is released	: OFF

   
   

YES>>Replace the combination meter.

NO>>GO TO 2.

Perform a check for the parking brake switch signal circuit. Refer to Diagnosis Procedure.

YES>>GO TO 3.

NO>>Repair harness or connector.

Perform a unit check for the parking brake switch. Refer to Component Inspection.

YES>>Replace the combination meter.

NO>>Replace the parking brake switch.