C1755, C1756, C1757, C1758 POOR RECEIVING CONDITIONS
C1755 C1756 C1757 C1758
Description
A DTC is detected if the radio signal output from the transmitter is interrupted by external electromagnetic interference for 10 minutes or more.
DTC Logic
DTC DETECTION LOGIC|
DTC |
Display Item |
Malfunction detected condition |
Possible causes |
|
C1755 |
PR RECEIV COND FL |
The data signal from the front LH wheel transmitter cannot be detected due to external electromagnetic interference. (DTC C1708 is displayed at the same time.) |
External electromagnetic interference |
|
C1756 |
PR RECEIV COND FR |
The data signal from the front RH wheel transmitter cannot be detected due to external electromagnetic interference. (DTC C1709 is displayed at the same time.) |
|
|
C1757 |
PR RECEIV COND RR |
The data signal from the rear RH wheel transmitter cannot be detected due to external electromagnetic interference. (DTC C1710 is displayed at the same time.) |
|
|
C1758 |
PR RECEIV COND RL |
The data signal from the rear LH wheel transmitter cannot be detected due to external electromagnetic interference. (DTC C1711 is displayed at the same time.) |
■ CAUTION ■
If DTC C1755, C1756, C1757, or C1758 (low communication performance) is detected along with, C1708, C1709, C1710, or C1711 (no transmitter data) first diagnose C1755, C1756, C1757, or C1758 (low communications performance).
DTC REPRODUCTION PROCEDURE
1.DTC REPRODUCTION PROCEDURE 
With CONSULT-III