B260F ENGINE STATUS
INTELLIGENT KEY SYSTEM
B260F
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGICNOTE：
- If DTC B260F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic.
- If DTC B260F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic.
|
DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
|
B260F |
ENG STATE SIG LOST |
BCM has not yet received the engine status signal from ECM when ignition switch is in the ON position |
ECM |
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE