B2617 STARTER RELAY CIRCUIT
INTELLIGENT KEY SYSTEM
B2617
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in the START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication.
DTC Logic
DTC DETECTION LOGICNOTE:
- If DTC B2617 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic.
- If DTC B2617 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic.
- If DTC B2617 is displayed with DTC B210E for IPDM E/R, first perform the trouble diagnosis for DTC B210E. Refer to DTC Logic.
|
DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
|
B2617 |
STARTER RELAY CIRC |
An immediate operation of starter relay is requested by BCM, but there is no response for more than 1 second |
|
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE