B210D STARTER RELAY
INTELLIGENT KEY SYSTEM
B210D
Description
Located in IPDM E/R, it runs the starter motor. The starter relay is turned ON by the BCM when the ignition switch is in the START position. IPDM E/R transmits the starter relay ON signal to BCM via CAN communication.
DTC Logic
DTC DETECTION LOGICNOTE:
- If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic.
- If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to DTC Logic.
|
DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
|
B210D |
STARTER RELAY ON |
IPDM E/R detects that the relay is stuck in the ON position even if the followings conditions are met for about 1 second.
|
IPDM E/R |
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE