B210F PNP/CLUTCH INTERLOCK SWITCH

INTELLIGENT KEY SYSTEM

B210F

Description

IPDM E/R confirms the shift position with the following signals.

DTC DETECTION LOGIC

NOTE：
If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B210F	INTER LOCK/PNP SW ON	IPDM E/R detects the difference between the signals below for 1 second or more. P/N position signal from TCM Shift position signal from BCM (CAN)	Harness or connectors (TCM circuit is open or shorted) TCM BCM IPDM E/R

DTC CONFIRMATION PROCEDURE

1.PERFORM DTC CONFIRMATION PROCEDURE

1.CHECK BCM INPUT SIGNAL

2.CHECK PNP SWITCH CIRCUIT