B2110 PNP/CLUTCH INTERLOCK SWITCH

INTELLIGENT KEY SYSTEM

B2110

Description

IPDM E/R confirms the shift position with the following signals.

DTC DETECTION LOGIC

NOTE：
If DTC B2110 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic.

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B2110	INTER LOCK/PNP SW	IPDM E/R detects the difference between the signals below for 1 second or more. P/N position signal from TCM Shift position signal from BCM (CAN)	Harness or connectors (TCM circuit is open or shorted) TCM IPDM E/R BCM

DTC CONFIRMATION PROCEDURE

1.PERFORM DTC CONFIRMATION PROCEDURE

1.CHECK BCM INPUT SIGNAL

2.CHECK PNP SWITCH CIRCUIT