P0827, P0828 AUTO/MANUAL RANGE CHANGE SWITCH
TRANSMISSION: GR6Z30A
P0827 P0828
Description
The auto/manual range change switch 1 and Auto/Manual range change switch 2 are installed on the control device and commands a transition to M range or A range according to the driver's request.
DTC Logic
DTC DETECTION LOGIC|
DTC |
Self-diagnosis name |
DTC detection condition |
Possible cause |
|
P0827 |
Range switching signal compatibility Low |
A DTC is set if TCM simultaneously detects the OFF signal from the auto/manual range change switch 1 and OFF signal from the auto/manual range change switch 2. |
|
|
P0828 |
Range switching signal compatibility High |
A DTC is set if TCM simultaneously detects the ON signal from the auto/manual range change switch 1 and ON signal from the auto/manual range change switch 2. |
|
DTC CONFIRMATION PROCEDURE
1.PREPARATION BEFORE OPERATION
With CONSULT-III