SHIFT POSITION INDICATOR CIRCUIT

With CONSULT-III

1. Turn ignition switch ON.
2. Check “Self Diagnostic Result” of “TRANSMISSION”.

YES>>GO TO 2.

NO>>Check DTC detected item. Refer to DTC Index.

Check the following harness connector pin terminals for any malfunctions on the connections, harness sheath or other areas. Refer to Intermittent Incident

• Control device harness connector
• Paddle shifter (shift-up switch) harness connector
• Paddle shifter (shift-down switch) harness connector
• TCM harness connector
• Transmission harness connector
• Park position switch harness connector
• Combination meter harness connector

YES>>Replace the combination meter. Refer to Exploded View.

NO>>Repair or replace damaged parts.