DOOR CHECK LINK
DOOR
Exploded View
|
1. |
Door panel |
2. |
Door striker cover |
3. |
TORX bolt |
|
4. |
Door striker |
5. |
Door inner west reinforcement |
6. |
Door grip bracket |
|
7. |
Door module assembly |
8. |
Bracket |
9. |
Check link |
|
10. |
Door hinge |
11. |
Dovetail male |
12. |
Dovetail female cover |
|
13. |
Dovetail female |
|
|
|
|
 : Vehicle front |
|||||
|
Refer to Components for the symbols shown in the figure. |
|||||
Removal and Installation
REMOVAL- 1.Remove the door finisher. Refer to Removal and Installation.
- 2.Fully close the door window.
- 3.Remove the door speaker.
- 4.Remove the door check link (body side) mounting bolts.
- 5.Remove the driver side mounting bolts of door check link, and then remove the door check link from the inside of the door panel.
■ CAUTION ■
Never damage the door window with the door check link. INSTALLATIONInstall in the reverse order of removal.
■ CAUTION ■
- Apply anticorrosive agent onto the mounting surface.
- After installation, check door open/close operation.