DOVETAIL
DOOR
Exploded View
|
1. |
Door panel |
2. |
Door striker cover |
3. |
TORX bolt |
|
4. |
Door striker |
5. |
Door inner west reinforcement |
6. |
Door grip bracket |
|
7. |
Door module assembly |
8. |
Bracket |
9. |
Check link |
|
10. |
Door hinge |
11. |
Dovetail male |
12. |
Dovetail female cover |
|
13. |
Dovetail female |
|
|
|
|
|
|
|||||
|
Refer to Components for the symbols shown in the figure. |
|||||
Removal and Installation
REMOVAL
Dovetail Male- 1.Remove the door inner west reinforcement. Refer to Exploded View.
- 2.Fix the nut in the door panel using tools, and then rotate the dovetail male to remove.
■ CAUTION ■
Never drop the nuts in the door panel.
Dovetail Female- 1.Remove the dovetail female cover.
- 2.Remove the rear side finisher. Refer to Exploded View.
- 3.Remove the mounting bolts, and then remove the dovetail female.
INSTALLATIONInstall in the reverse order of removal.
■ CAUTION ■
- Be careful about the direction of the dovetail male mounting nut.
- Check the engagement between dovetail female and dovetail male for noise or looseness when closing the door.