TRUNK LID WEATHER-STRIP
TRUNK LID
Exploded View
|
1. |
Trunk lid assembly |
2. |
Trunk lid key cylinder |
3. |
Trunk lid cylinder bracket |
|
4. |
Trunk lid lock control cable |
5. |
Trunk lid striker |
6. |
Trunk lid lock cover |
|
7. |
Trunk lid lock assembly |
8. |
Bumper rubber |
9. |
Trunk lid weather-strip |
|
10. |
Trunk lid hinge stopper |
11. |
Trunk lid hinge |
12. |
TORX bolt |
|
13. |
Trunk lid stay |
14. |
Protector harness |
|
|
|
A. |
Vehicle center mark |
|
|||
|
: Clip |
|
|
|
|
|
Refer to Components for the symbols shown in the figure. |
|||||
Removal and Installation
REMOVALPull up and remove engagement with body from trunk lid weather-strip joint.
■ CAUTION ■
Never pull strongly the trunk lid weather-strip during removal. INSTALLATION- 1.Working from the upper section, align the center of trunk lid weather-strip with vehicle center mark and install weather-strip.
- 2.Engage the trunk lid weather-strip with the vehicle body.
- Securely fit each corner.
- Pull trunk lid weather-strip lightly to check for looseness.
■ CAUTION ■