B1210 SIDE COLLISION DETECTION

B1210

Description
DTC Logic
Diagnosis Procedure

Description

DTC B1210 SIDE COLLISION DETECTION

When satellite sensor detects component damage resulting from a side collision, blinks or illuminates the air bag warning lamp to inform the driver. Malfunctioning can be detected by CONSULT-III.

OPERATION

The front side air bag and side curtain air bag are activated by the air bag diagnosis sensor unit signal transmitted at the time of the side collision.

STRUCTURE

It consists of satellite sensor, air bag diagnosis sensor unit, front side air bag and side curtain air bag.

INSTALLATION

Refer to Exploded View (Front LH/RH side air bag module), Exploded View (Side curtain air bag module), Exploded View (LH/RH satellite sensor).

DTC Logic

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
B1210	SIDE COLLISION DETECTION	Front side air bag, side curtain air bag is deployed	—

DTC CONFIRMATION PROCEDURE

1.CHECK SELF-DIAG RESULT

Diagnosis Procedure

■ WARNING ■

Before servicing, turn ignition switch OFF, disconnect battery negative terminal and wait at least 3 minutes. (To discharge backup capacitor)

Never use unspecified tester or other measuring device.

1.CHECK FRONT SIDE AIR BAG MODULE

2.CHECK SIDE CURTAIN AIR BAG MODULE

3.CHECK SATELLITE SENSOR

4.CHECK AIR BAG DIAGNOSIS SENSOR UNIT

5.CHECK WIRING HARNESS/HARNESS CONNECTOR

6.FINAL CHECK