INTEGRATED HOMELINK TRANSMITTER

Description
Component Function Check
Diagnosis Procedure

Description

Integrated Homelink Transmitter can store and transmit a maximum of 3 radio signals.
Allows operation of garage doors, gates, home and office lighting, entry door locks and security system, etc.
Integrated Homelink Transmitter power supply uses vehicle battery, which enables it to maintain every program in case battery is discharged or removed.

Component Function Check

1.CHECK FUNCTION

2.CHECK ILLUMINATE

3.CHECK TRANSMITTER

Diagnosis Procedure

1.CHECK POWER SUPPLY

Turn ignition switch OFF.
Disconnect auto anti-dazzling inside mirror (homelink universal transceiver) connector.
Check voltage between auto anti-dazzling inside mirror (home link universal transceiver) harness connector and ground.

(+)		(-)	Condition	Voltage (V) (Approx.)
Auto anti-dazzling inside mirror (Homelink universal transceiver)
connector	Terminal	Ground	Ignition switch position: OFF	Battery voltage
R9	5

Is the inspection result normal?

YES>>GO TO 2.

NO>>
Check the following.

10A fuse [No. 6 located in the fuse block (J/B)]
Harness for open or short between fuse and auto anti-dazzling inside mirror (homelink universal transceiver).

2.CHECK GROUND CIRCUIT

3.CHECK INTERMITTENT INCIDENT

INTEGRATED HOMELINK TRANSMITTER

Description

Component&nbsp;Function&nbsp;Check

Diagnosis Procedure

Component Function Check