AWD WARNING LAMP
TRANSFER
Description
- Turns ON when there is a malfunction in AWD system. AWD warning lamp indicates the vehicle is in fail-safe mode and shifting to rear-wheel drive or 4-wheel drive (front-wheels still have some driving torque).
- Also turns ON when ignition switch is turned ON, for the purpose of lamp check. Turns OFF approximately for 1 second after the engine starts if system is normal.
AWD WARNING LAMP INDICATION|
Condition |
AWD warning lamp |
|
Lamp check |
Turns ON when ignition switch is turned ON. Turns OFF approx. 1 second after the engine start. |
|
AWD system malfunction |
ON |
|
Protection function is activated due to excessive load to electric controlled coupling. (AWD system is not malfunctioning and AWD system changes to rear wheel drive.) |
Quick blinking: 2 times/second (Blinking in approx. 1 minute and then turning OFF) |
|
Large difference in diameter of front/rear tires |
Slow blinking: 1 time/2 seconds (Continuing to blink until turning ignition switch OFF) |
|
Other than above (system normal) |
OFF |
■ CAUTION ■
- AWD warning lamp also turns ON due to data reception error, CAN communication error etc.
1.CHECK AWD WARNING LAMP FUNCTION 
With CONSULT-III